Showing 1–9 of 13 results

Bitumen Emulsion

18,000
Bitumen emulsion is a liquefied type of bitumen with a low viscosity. By dispersing bitumen in water and adding an emulsifier, ordinary bitumen turns into a low viscosity liquid that can easily be used in a variety of applications, including repairing and maintaining roads, waterproofing, spraying, etc.

Bitumen Membrane Sheet

4,000
bitumen membrane is used for bolster concentrate roof waterproofing. This waterproofing membrane is come on site in the form of rolls.

Hygrip Membrane Roll

5,800
Hy-Grip modified bituminous membranes meet the highest international quality standards and are suitable for a wide range of applications. Roofs, re-roofing, accessible and non-accessible roofs, vehicle parking decks, and a range of additional applications in the home and industrial sectors are all covered by Hy-Grip membranes.

Koster PU Injection

1,000
Koster PU  is an injection foam for waterproofing of cracks in concrete and masonry. It stops leakages even under pressurised water. KOSTER PU is applied in a single step without necessity of subsequent injection with a solid body resin. KOSTER PU reacts only in contact with water.

PU Joint Sealents

650
PU Sealant is a one-part, elastomer sealant based on urethane which cures at room temperature. It is mainly used in applications relating to assembling and sealing. For these applications, the product is referred to as adhesive sealant or polyurethane adhesive sealant.

SBR Chemical

270
SBR is widely known as waterproofing based chemicals which is applied many as an external coating over the material. Construction Chemicals SBR is a white styrene butadiene emulsion used to improve the properties of cement renders, screeds and mortars. It is also used in conjunction with Construction Chemicals Tanking Slurry as a priming coat or tight render basecoat.

Swell Bar

350
Swell Bar are swell able acrylic pre-form strips and rings that come in a variety of different profiles. The seals swell in contact with both potable water and salt water, and is resistant to a variety of chemicals.

Thermoshield

5,000
Thermoshield is one component polymoorph base elastomeric.

Ultra Membrane Seal | Waterproofing | Construction in Pakistan

Ultra Construction membrane seal is a very useful product for waterproofing specially on the big structures. It is a two component based product, one liquid, 5 liters and the other 10 kg powder. This 10 kg powder has to be mixed with 5 liters of liquid. You will find it as distemper after mixing both components. In fact, if the Ultra Membrane Seal is not applied before and the tiles have been laid on the roof the definitely it will have cracks in the roof, or the penetration of water is increasing. Ultra Membrane Seal is a polymer base, it becomes part of the structure. When you put the first coat on it, it will penetrate in the structure and become the part of the structure then second coat will protect the first one and prevents movement and vibration and eliminates crashes.