Nunc per mollis pot enti amet imperdiet blandit dis eu sociosqu accumsan dap ibus ultricies tristique montes a
Swell Bar are swell able acrylic pre-form strips and rings that come in a variety of different profiles. The seals swell in contact with both potable water and salt water, and is resistant to a variety of chemicals.
Category: Water Proofings
Bitumen emulsion is a liquefied type of bitumen with a low viscosity. By dispersing bitumen in water and adding an emulsifier, ordinary bitumen turns into a low viscosity liquid that can easily be used in a variety of applications, including repairing and maintaining roads, waterproofing, spraying, etc.
Ultra weather guard is used as a water repellent. This is a single component product, which will make you look like water. Some people has made, big beautiful buildings which is made of red colored bricks, which is called Gutka bricks. Some of these use marbles outside of their buildings, but all of them are absorb water, as it is raining on top of them, this water penetrates its interior and building. For the solution of all these, Ultra has adopted the name of its product Weather Guard. This single component is available in a completely transparent color and can be applied with a brush after cleaning the surface properly or we can apply it with a spray. In other words, it prevents 100% of water penetration. And this product of Ultra stays effective for at least 15 years.
SBR is widely known as waterproofing based chemicals which is applied many as an external coating over the material. Construction Chemicals SBR is a white styrene butadiene emulsion used to improve the properties of cement renders, screeds and mortars. It is also used in conjunction with Construction Chemicals Tanking Slurry as a priming coat or tight render basecoat.
Koster PU is an injection foam for waterproofing of cracks in concrete and masonry. It stops leakages even under pressurised water. KOSTER PU is applied in a single step without necessity of subsequent injection with a solid body resin. KOSTER PU reacts only in contact with water.
Ultra Construction membrane seal is a very useful product for waterproofing specially on the big structures. It is a two component based product, one liquid, 5 liters and the other 10 kg powder. This 10 kg powder has to be mixed with 5 liters of liquid. You will find it as distemper after mixing both components. In fact, if the Ultra Membrane Seal is not applied before and the tiles have been laid on the roof the definitely it will have cracks in the roof, or the penetration of water is increasing. Ultra Membrane Seal is a polymer base, it becomes part of the structure. When you put the first coat on it, it will penetrate in the structure and become the part of the structure then second coat will protect the first one and prevents movement and vibration and eliminates crashes.
PU Sealant is a one-part, elastomer sealant based on urethane which cures at room temperature. It is mainly used in applications relating to assembling and sealing. For these applications, the product is referred to as adhesive sealant or polyurethane adhesive sealant.
Unicorn Seal K1 is two component elastomeric cement based waterproofing coating.
Unicorn Seal K-1
Unicorn Seal K-1 is a waterproof protective coating which has high flexibility. It is also known as two components coating which is polymer modified and cement based elastomeric waterproof protective coating normally used for the purpose of concrete waterproofing. Because of its excellent adhesion, weatherproofing and waterproofing properties and abrasion resistance qualities seamless protective area is ensured. Unicorn Seal K-1 ,waterproofing chemical ,can apply both on vertical and horizontal surfaces it is considered an economical way of waterproofing comparatively and also known as polymer-modified cement-based protective coating. Before Unicorn seal K1 waterproofing chemical coating or application the substrate must be sound, properly cleaned and free from all voids and cracks. Bond breakers like oil, grease and dirt particles, water repellents must also be cleaned property before this cementitious coating. This waterproofing chemical material may be applied by brush, roller, troweled it depend upon the type of application and project specifications. Its shelf life is 12 months and it must be stored at 35° C or below in a shaded environment. The liquid component of this product must not be allowed to freeze. If it is stored at high temperature then its shelf life will be reduced. Unicorn Seal K-1 is coated in below mentioned surfaces both vertically and horizontally:
- Water structures
- Sewage treatment plants
- Basement walls
- Balconies, Plazas, deck
- Underneath tile adhesive mortars
- Wastewater treating plants
- Reinforced concrete structure
- Water tanks and reservoir
- All similar works
Advantages of Unicorn Seal K-1With the help of this waterproofing product large static or dynamic cracks can easily be sealed it also bridges shrinkage cracks. This waterproofing product is exposed or applied on required surface with flexible or rigid mortars in order to bring uniform appearance. There are several advantages of this admixture mentioned below:
Easy to use and apply:This waterproofing material can easily be applied on the required surface and ensure the safety of worker and the required results can easily be achieved with the application of this waterproofing product.
Environmental friendly:This waterproofing coating is considered as environment friendly material because it has no adverse effect on environment and also does not effect the health of residents of the building.
UV Stable:This waterproofing chemical coating is UV-stable coating that avoids ultraviolet radiation by sun which is harmful to humans and materials.
Flexibility:Flexibility is one of the major advantage of Unicorn Seal K-1. Because of this advantage the chances of exposed crack are reduced to minimized and there is no way for water to enter. Flexibility makes if durable and there is no effect of thermal expansion and contraction.
- Resist hydro static pressure
- Crack bridging ability
- Enable substrate to breath
- Can also be applied to damp surfaces
- Abrasion resistant
- Self-curing material
- Active barrier for water and Carbon dioxide