UNICORN CHEMICALS

FEATURED CATEGORIES

Unicorn Chemicals is a leading manufacturer and supplier in Construction Chemicals in all over Pakistan

Bitumen Coating (4)

Concrete Admixtures (3)

Flooring

Heat proofing (5)

Joint Sealents (2)

Surface Treatment

Termite Control

Water Proofing (10)

Unicorn Chemicals

FEATURED PRODUCTS

Our goal here is to provide low prices on high quality products and excellent services to consumers.
"Quality is not an. act, it is a habit."
BEST SELLERS
  • BEST SELLERS

Bitu Seal M100

299
Bitu seal M100  plastic is a heavy-duty mastic sealer and repair compound. Bitu seal plastic may be used to seal most roofing defects: sheeting laps, valleys, gutters, down-pipes, enlarged screw holes, to repair roof cracks, flashings, cracked tiles and patch repairs to tanks.

PU Joint Sealents

650
PU Sealant is a one-part, elastomer sealant based on urethane which cures at room temperature. It is mainly used in applications relating to assembling and sealing. For these applications, the product is referred to as adhesive sealant or polyurethane adhesive sealant.

SBR Chemical

270
SBR is widely known as waterproofing based chemicals which is applied many as an external coating over the material. Construction Chemicals SBR is a white styrene butadiene emulsion used to improve the properties of cement renders, screeds and mortars. It is also used in conjunction with Construction Chemicals Tanking Slurry as a priming coat or tight render basecoat.

Super Plasticizer

55
Super plasticizers, also known as high range water reducers, are additives used in making high strength concrete. Plasticizers are chemical compounds that enable the production of concrete with approximately 15% less water content. Super plasticizers allow reduction in water content by 30% or more.

Thermoshield

5,000
Thermoshield is one component polymoorph base elastomeric.

Unicorn Seal K1 waterproofing chemical

2,500
Unicorn Seal K1 is two component elastomeric cement based waterproofing coating.

Unicorn Seal K-1

Unicorn Seal K-1 is a waterproof protective coating which has high flexibility. It is also known as two components coating which is polymer modified and cement based elastomeric waterproof protective coating normally used for the purpose of concrete waterproofing. Because of its excellent adhesion, weatherproofing and waterproofing properties and abrasion resistance qualities seamless protective area is ensured. Unicorn Seal K-1 ,waterproofing chemical ,can apply both on vertical and horizontal surfaces it is considered an economical way of waterproofing comparatively and also known as polymer-modified cement-based protective coating. Before Unicorn seal K1 waterproofing chemical coating or application the substrate must be sound, properly cleaned and free from all voids and cracks. Bond breakers like oil, grease and dirt particles, water repellents must also be cleaned property before this cementitious coating. This waterproofing chemical  material may be applied by brush, roller, troweled it depend upon the type of application and project specifications. Its shelf life is 12 months and it must be stored at 35° C or below in a shaded environment. The liquid component of this product must not be allowed to freeze. If it is stored at high temperature then its shelf life will be reduced. Unicorn Seal K-1 is coated in below mentioned surfaces both vertically and horizontally:
  • Water structures
  • Sewage treatment plants
  • Basement walls
  • Balconies, Plazas, deck
  • Underneath tile adhesive mortars
  • Wastewater treating plants
  • Reinforced concrete structure
  • Water tanks and reservoir
  • All similar works

Advantages of Unicorn Seal K-1

With the help of this waterproofing product large static or dynamic cracks can easily be sealed it also bridges shrinkage cracks. This waterproofing product is exposed or applied on required surface with flexible or rigid mortars in order to bring uniform appearance. There are several advantages of this admixture mentioned below:

Easy to use and apply:

This waterproofing material can easily be applied on the required surface and ensure the safety of worker and the required results can easily be achieved with the application of this waterproofing product.

Environmental friendly:

This waterproofing coating is considered as environment friendly material because it has no adverse effect on environment and also does not effect the health of residents of the building.

UV Stable:

This waterproofing chemical coating is UV-stable coating that avoids ultraviolet radiation by sun which is harmful to humans and materials.

Flexibility:

Flexibility is one of the major advantage of Unicorn Seal K-1. Because of this advantage the chances of exposed crack are reduced to minimized and there is no way for water to enter. Flexibility makes if durable and there is no effect of thermal expansion and contraction.

Others:

  • Resist hydro static pressure
  • Crack bridging ability
  • Enable substrate to breath
  • Can also be applied to damp surfaces
  • Abrasion resistant
  • Self-curing material
  • Active barrier for water and Carbon dioxide
All Products
  • All Products

Bitu Seal M100

299
Bitu seal M100  plastic is a heavy-duty mastic sealer and repair compound. Bitu seal plastic may be used to seal most roofing defects: sheeting laps, valleys, gutters, down-pipes, enlarged screw holes, to repair roof cracks, flashings, cracked tiles and patch repairs to tanks.

Bitumen Emulsion

18,000
Bitumen emulsion is a liquefied type of bitumen with a low viscosity. By dispersing bitumen in water and adding an emulsifier, ordinary bitumen turns into a low viscosity liquid that can easily be used in a variety of applications, including repairing and maintaining roads, waterproofing, spraying, etc.

Bitumen Membrane Sheet

4,000
bitumen membrane is used for bolster concentrate roof waterproofing. This waterproofing membrane is come on site in the form of rolls.

EPS Sheets

240
Building and construction applications are the largest outlet for EPS accounting for around two-thirds of demand. Large quantities are used to make insulation foam for closed cavity walls, roofs and floor insulation. EPS foam also finds uses in road construction, bridges, drainage, flotation and sound insulation.

Glass Wool Sheets

6,000
Glass wool is an insulating material made from fibres of glass arranged using a binder into a texture similar to wool. Glass wool is produced in rolls or in slabs, with different thermal and mechanical properties.

Hygrip Membrane Roll

5,800
Hy-Grip modified bituminous membranes meet the highest international quality standards and are suitable for a wide range of applications. Roofs, re-roofing, accessible and non-accessible roofs, vehicle parking decks, and a range of additional applications in the home and industrial sectors are all covered by Hy-Grip membranes.

Koster PU Injection

1,000
Koster PU  is an injection foam for waterproofing of cracks in concrete and masonry. It stops leakages even under pressurised water. KOSTER PU is applied in a single step without necessity of subsequent injection with a solid body resin. KOSTER PU reacts only in contact with water.

PU Joint Sealents

650
PU Sealant is a one-part, elastomer sealant based on urethane which cures at room temperature. It is mainly used in applications relating to assembling and sealing. For these applications, the product is referred to as adhesive sealant or polyurethane adhesive sealant.

SBR Chemical

270
SBR is widely known as waterproofing based chemicals which is applied many as an external coating over the material. Construction Chemicals SBR is a white styrene butadiene emulsion used to improve the properties of cement renders, screeds and mortars. It is also used in conjunction with Construction Chemicals Tanking Slurry as a priming coat or tight render basecoat.

Super Plasticizer

55
Super plasticizers, also known as high range water reducers, are additives used in making high strength concrete. Plasticizers are chemical compounds that enable the production of concrete with approximately 15% less water content. Super plasticizers allow reduction in water content by 30% or more.

Swell Bar

350
Swell Bar are swell able acrylic pre-form strips and rings that come in a variety of different profiles. The seals swell in contact with both potable water and salt water, and is resistant to a variety of chemicals.

Thermoshield

5,000
Thermoshield is one component polymoorph base elastomeric.

Tile Bond

300
"Tile Bond" Roof Tile Adhesive is a portable one-component polyurethane foam adhesive for attaching concrete and clay roof tiles. Packaged in a self-contained disposable can or canister, it is quicker and easier to install compared to traditional attachment methods such as screws, mortar, wire ties and clips.

Unicorn Seal K1 waterproofing chemical

2,500
Unicorn Seal K1 is two component elastomeric cement based waterproofing coating.

Unicorn Seal K-1

Unicorn Seal K-1 is a waterproof protective coating which has high flexibility. It is also known as two components coating which is polymer modified and cement based elastomeric waterproof protective coating normally used for the purpose of concrete waterproofing. Because of its excellent adhesion, weatherproofing and waterproofing properties and abrasion resistance qualities seamless protective area is ensured. Unicorn Seal K-1 ,waterproofing chemical ,can apply both on vertical and horizontal surfaces it is considered an economical way of waterproofing comparatively and also known as polymer-modified cement-based protective coating. Before Unicorn seal K1 waterproofing chemical coating or application the substrate must be sound, properly cleaned and free from all voids and cracks. Bond breakers like oil, grease and dirt particles, water repellents must also be cleaned property before this cementitious coating. This waterproofing chemical  material may be applied by brush, roller, troweled it depend upon the type of application and project specifications. Its shelf life is 12 months and it must be stored at 35° C or below in a shaded environment. The liquid component of this product must not be allowed to freeze. If it is stored at high temperature then its shelf life will be reduced. Unicorn Seal K-1 is coated in below mentioned surfaces both vertically and horizontally:
  • Water structures
  • Sewage treatment plants
  • Basement walls
  • Balconies, Plazas, deck
  • Underneath tile adhesive mortars
  • Wastewater treating plants
  • Reinforced concrete structure
  • Water tanks and reservoir
  • All similar works

Advantages of Unicorn Seal K-1

With the help of this waterproofing product large static or dynamic cracks can easily be sealed it also bridges shrinkage cracks. This waterproofing product is exposed or applied on required surface with flexible or rigid mortars in order to bring uniform appearance. There are several advantages of this admixture mentioned below:

Easy to use and apply:

This waterproofing material can easily be applied on the required surface and ensure the safety of worker and the required results can easily be achieved with the application of this waterproofing product.

Environmental friendly:

This waterproofing coating is considered as environment friendly material because it has no adverse effect on environment and also does not effect the health of residents of the building.

UV Stable:

This waterproofing chemical coating is UV-stable coating that avoids ultraviolet radiation by sun which is harmful to humans and materials.

Flexibility:

Flexibility is one of the major advantage of Unicorn Seal K-1. Because of this advantage the chances of exposed crack are reduced to minimized and there is no way for water to enter. Flexibility makes if durable and there is no effect of thermal expansion and contraction.

Others:

  • Resist hydro static pressure
  • Crack bridging ability
  • Enable substrate to breath
  • Can also be applied to damp surfaces
  • Abrasion resistant
  • Self-curing material
  • Active barrier for water and Carbon dioxide

Water Stopper

150
A waterstopper is an element of a concrete structure, intended to prevent the passages of fluids (such as water) when embedded in and running continuously through concrete joints.

XPS Sheets

680
XPS is a special type of expanded extruded polystyrene with a closed cell structure. XPS can be covered with wall paper, tiled or plastered. Expanded Polystyrene, referred to as XPS, is a closed cell insulation product commonly used in remodelling and new construction applications. Due to the manufacturing process, XPS insulation is typically available only in standard dimension square or rectangular boards.

How Products are Implemented?

Recent Projects

We have successfully completed a variety of impressive construction projects. Our management practices have benefited greatly from the information we have gained from project management. We now use programs and methods that have been honoured for many years in the business.
Mohmand Damn 800MV Project
Orange Line Project
Road Construction Project
Pakistan Military Academy
Defence Housing Authority Islamabad
Rawal Dam Interchange Project
Sahiwal International Airport
Kohenoor Textile Mill

ALL-IN-ONE CONSTRUCTION CHEMICAL SOLUTION

ABOUT US