Showing 1–12 of 50 results

Bitumen Emulsion

18,000
Bitumen emulsion is a liquefied type of bitumen with a low viscosity. By dispersing bitumen in water and adding an emulsifier, ordinary bitumen turns into a low viscosity liquid that can easily be used in a variety of applications, including repairing and maintaining roads, waterproofing, spraying, etc.

Bitumen Membrane Sheet

4,000
bitumen membrane is used for bolster concentrate roof waterproofing. This waterproofing membrane is come on site in the form of rolls.

EPS Sheets

240
Building and construction applications are the largest outlet for EPS accounting for around two-thirds of demand. Large quantities are used to make insulation foam for closed cavity walls, roofs and floor insulation. EPS foam also finds uses in road construction, bridges, drainage, flotation and sound insulation.

Glass Wool Sheets

6,000
Glass wool is an insulating material made from fibres of glass arranged using a binder into a texture similar to wool. Glass wool is produced in rolls or in slabs, with different thermal and mechanical properties.

Koster PU Injection

1,000
Koster PU  is an injection foam for waterproofing of cracks in concrete and masonry. It stops leakages even under pressurised water. KOSTER PU is applied in a single step without necessity of subsequent injection with a solid body resin. KOSTER PU reacts only in contact with water.

Swell Bar

350
Swell Bar are swell able acrylic pre-form strips and rings that come in a variety of different profiles. The seals swell in contact with both potable water and salt water, and is resistant to a variety of chemicals.

Tile Bond

300
"Tile Bond" Roof Tile Adhesive is a portable one-component polyurethane foam adhesive for attaching concrete and clay roof tiles. Packaged in a self-contained disposable can or canister, it is quicker and easier to install compared to traditional attachment methods such as screws, mortar, wire ties and clips.

Ultra Accelerator 727 | Power 1100 | | Waterproof| Joint Sealant

The shuttering of every concrete structure Is opened at least 10 to 15 days after pouring. When you want to open the shattering early on fast track projects, Usually in the winter, more than 10 to15 days may require more than 20 to 25 for 30 days are required to open the shuttering. Ultra accelerators are used for all these kinds of concrete. Ultra admixtures 727 is a complete mixture for Fast Track Projects Which is a naphthalene Product. In the concrete it should be added From 500ml per bag To 1 litre per bag Along with water in the mixture.There is one precaution with it thatAs you add concrete admixture Then the amount of water Should be reduced that means That in usual cases if you Are adding 25 litre of water Then with accelerator 727 the amount of water ship the 15 litre. That means the main purpose of concrete admixture is Water reduction And this Ultra accelerator 727 Does Height water reduction.

Ultra Aerolastic Sealants | Construction Sealants| Best Chemical

Ultra Aerolastic Sealant is a bitumen based product and this is a hot applied product because it is heated before applying. It is obvious from its name “aeroelastic” that it is used for runaways and their joints. Similarly it is also used in the airport joints and hangers. This is the fuel resistant product which does not spoil on any kind of spill like oil or grease. Usually it is used in the top big runways of Pakistan, airports and it seems to be flexible after application and it is durable and has long life effects. It is durable and used as a long life Sealant. It is durable and used as a long life Sealant. The following are the key properties of Aerolastic sealant for evaluation on your building . • Consistency Ultra Aerolastic sealants have a fluid consistency and are generally used in horizontal joints, and can be self-leveling. These sealants are thicker and do not run, even on vertical joints.

Ultra Aerolastic Sealants | Epoxy Coating | Hardfloor | Chemical

Ultra construction Aeroelastic Sealants is a bitumen based product and this is a hot applied product because it is heated before applying. It is obvious from its name “aeroelastic” that it is used for runaways and their joints. Similarly it is also used in the airport joints and hangers. This is the fuel resistant product which does not spoil on any kind of spill like oil or grease. Usually it is used in the top big runways of Pakistan, airports and it seems to be flexible after application and it is durable and has long life effects. It is durable and used as a long life Sealant. It is durable and used as a long life Sealant.

Ultra Anti Corrosion | Protective Coating | Weather Shield

These are two component epoxy base products. It is used on the structure where the attack of water is more. Iron structure got destructive with water attack, then to prevent it from Corrosion, apply Anti Corrosion wit brush after cleaning the surface and removing rust from the surface. Ultra Anti Corrosion is extremely durable or provides long life to your structure. This is the lifeblood of your structure.

Ultra Bitumastic Sealants | Expansion Joint Sealant |

Ultra Construction Bitumastic Sealant usually use for the vertical joints either of bridges, canal lining joints or the joints of any big tall building. It is a ready to use product which does not require heating before applying and Bitumastic Sealant is a very useful product which is applied as long life. Ultra Bitumastic Sealant available in 12 KG drums and this is a cold applied sealant. It will represent itself as a flexible sealant after applying. So, to make sure the joints of your buildings are enough strengthen it, to be used for the construction purpose of your building can be done with the help of our best quality product Ultra Bitumastic Sealant. You can buy the products like these from our stores at very low prices and rates. You can also buy other construction-related products of every kind. So, enjoy the best features of our products and make your construction perfect.