Showing 1–24 of 57 results

Bitu Seal M100

299
Bitu seal M100  plastic is a heavy-duty mastic sealer and repair compound. Bitu seal plastic may be used to seal most roofing defects: sheeting laps, valleys, gutters, down-pipes, enlarged screw holes, to repair roof cracks, flashings, cracked tiles and patch repairs to tanks.

Bitumen Emulsion

18,000
Bitumen emulsion is a liquefied type of bitumen with a low viscosity. By dispersing bitumen in water and adding an emulsifier, ordinary bitumen turns into a low viscosity liquid that can easily be used in a variety of applications, including repairing and maintaining roads, waterproofing, spraying, etc.

Bitumen Membrane Sheet

4,000
bitumen membrane is used for bolster concentrate roof waterproofing. This waterproofing membrane is come on site in the form of rolls.

EPS Sheets

240
Building and construction applications are the largest outlet for EPS accounting for around two-thirds of demand. Large quantities are used to make insulation foam for closed cavity walls, roofs and floor insulation. EPS foam also finds uses in road construction, bridges, drainage, flotation and sound insulation.

Glass Wool Sheets

6,000
Glass wool is an insulating material made from fibres of glass arranged using a binder into a texture similar to wool. Glass wool is produced in rolls or in slabs, with different thermal and mechanical properties.

Hygrip Membrane Roll

5,800
Hy-Grip modified bituminous membranes meet the highest international quality standards and are suitable for a wide range of applications. Roofs, re-roofing, accessible and non-accessible roofs, vehicle parking decks, and a range of additional applications in the home and industrial sectors are all covered by Hy-Grip membranes.

Koster PU Injection

1,000
Koster PU  is an injection foam for waterproofing of cracks in concrete and masonry. It stops leakages even under pressurised water. KOSTER PU is applied in a single step without necessity of subsequent injection with a solid body resin. KOSTER PU reacts only in contact with water.

PU Joint Sealents

650
PU Sealant is a one-part, elastomer sealant based on urethane which cures at room temperature. It is mainly used in applications relating to assembling and sealing. For these applications, the product is referred to as adhesive sealant or polyurethane adhesive sealant.

SBR Chemical

270
SBR is widely known as waterproofing based chemicals which is applied many as an external coating over the material. Construction Chemicals SBR is a white styrene butadiene emulsion used to improve the properties of cement renders, screeds and mortars. It is also used in conjunction with Construction Chemicals Tanking Slurry as a priming coat or tight render basecoat.

Super Plasticizer

55
Super plasticizers, also known as high range water reducers, are additives used in making high strength concrete. Plasticizers are chemical compounds that enable the production of concrete with approximately 15% less water content. Super plasticizers allow reduction in water content by 30% or more.

Swell Bar

350
Swell Bar are swell able acrylic pre-form strips and rings that come in a variety of different profiles. The seals swell in contact with both potable water and salt water, and is resistant to a variety of chemicals.

Thermoshield

5,000
Thermoshield is one component polymoorph base elastomeric.

Tile Bond

300
"Tile Bond" Roof Tile Adhesive is a portable one-component polyurethane foam adhesive for attaching concrete and clay roof tiles. Packaged in a self-contained disposable can or canister, it is quicker and easier to install compared to traditional attachment methods such as screws, mortar, wire ties and clips.

Ultra Accelerator 727 | Power 1100 | | Waterproof| Joint Sealant

The shuttering of every concrete structure Is opened at least 10 to 15 days after pouring. When you want to open the shattering early on fast track projects, Usually in the winter, more than 10 to15 days may require more than 20 to 25 for 30 days are required to open the shuttering. Ultra accelerators are used for all these kinds of concrete. Ultra admixtures 727 is a complete mixture for Fast Track Projects Which is a naphthalene Product. In the concrete it should be added From 500ml per bag To 1 litre per bag Along with water in the mixture.There is one precaution with it thatAs you add concrete admixture Then the amount of water Should be reduced that means That in usual cases if you Are adding 25 litre of water Then with accelerator 727 the amount of water ship the 15 litre. That means the main purpose of concrete admixture is Water reduction And this Ultra accelerator 727 Does Height water reduction.

Ultra Aerolastic Sealants | Construction Sealants| Best Chemical

Ultra Aerolastic Sealant is a bitumen based product and this is a hot applied product because it is heated before applying. It is obvious from its name “aeroelastic” that it is used for runaways and their joints. Similarly it is also used in the airport joints and hangers. This is the fuel resistant product which does not spoil on any kind of spill like oil or grease. Usually it is used in the top big runways of Pakistan, airports and it seems to be flexible after application and it is durable and has long life effects. It is durable and used as a long life Sealant. It is durable and used as a long life Sealant. The following are the key properties of Aerolastic sealant for evaluation on your building . • Consistency Ultra Aerolastic sealants have a fluid consistency and are generally used in horizontal joints, and can be self-leveling. These sealants are thicker and do not run, even on vertical joints.

Ultra Aerolastic Sealants | Epoxy Coating | Hardfloor | Chemical

Ultra construction Aeroelastic Sealants is a bitumen based product and this is a hot applied product because it is heated before applying. It is obvious from its name “aeroelastic” that it is used for runaways and their joints. Similarly it is also used in the airport joints and hangers. This is the fuel resistant product which does not spoil on any kind of spill like oil or grease. Usually it is used in the top big runways of Pakistan, airports and it seems to be flexible after application and it is durable and has long life effects. It is durable and used as a long life Sealant. It is durable and used as a long life Sealant.

Ultra Anti Corrosion | Protective Coating | Weather Shield

These are two component epoxy base products. It is used on the structure where the attack of water is more. Iron structure got destructive with water attack, then to prevent it from Corrosion, apply Anti Corrosion wit brush after cleaning the surface and removing rust from the surface. Ultra Anti Corrosion is extremely durable or provides long life to your structure. This is the lifeblood of your structure.

Ultra Bitumastic Sealants | Expansion Joint Sealant |

Ultra Construction Bitumastic Sealant usually use for the vertical joints either of bridges, canal lining joints or the joints of any big tall building. It is a ready to use product which does not require heating before applying and Bitumastic Sealant is a very useful product which is applied as long life. Ultra Bitumastic Sealant available in 12 KG drums and this is a cold applied sealant. It will represent itself as a flexible sealant after applying. So, to make sure the joints of your buildings are enough strengthen it, to be used for the construction purpose of your building can be done with the help of our best quality product Ultra Bitumastic Sealant. You can buy the products like these from our stores at very low prices and rates. You can also buy other construction-related products of every kind. So, enjoy the best features of our products and make your construction perfect.

Ultra Bitumen Emulsion | Waterprofing Floor | Construction

Ultra Construction Bitumen Emulsion is a bitumen base product which is used for waterproofing purposes. It is a single component product and is available in different packing, as it may be available in 15 kg and also available in 30 kg, 218 kg drums. Ultra Bitumen Emulsion is a ready to use product. In past to use bitumen, there is need to heat it by adding crude oil in it and it causes accidents. However Ultra Construction Chemical Private Limited has installed the latest bitumen emulsion plant in Pakistan in 2013 and this product is being used successfully all over the Pakistan. It is used to protect any cementitious structure. If these are sewerage pipelines, sewerage pipes, or piling of bridges, it is recommended to use Bitumen Emulsion on top of all, overhead contractors, on top of NHA projects. And we have this ready-to-use product, adding more polymers to make it more durable. The Ultra Bitumen Emulsion is very durable and provides long life protection to the structure.

Ultra Corr Bond | Waterproofing | Joint Sealants | Adhesive

Ultra Construction corr Bond is used as an epoxy bonding agent which is used for new to old concrete. Like I said before, this polymer bonding agent can be used within 20 days. If our joint is 28 days old then we use polymer bonding agent SBR but if the joint is older than 28 days then for old to new concrete whether it is 10 years old or 20 years old, we recommend ultra corr Bond. Ultra corr bond is an epoxy based product and it is composed of two components. After cleaning the surface carefully, mix part A in part B and apply with the help of brush on the specific area. After applying on the joints if there is winter season then let it be in the take free position for 1 hour and then add concrete on it and if it's summer then give it 15 to 20 minutes until it maintains that free position. If it's the summer season then you can add concrete after applying corr bond for 15 to 20 minutes. Ultra corr bond eliminates concrete joints completely and it's one of our best products.

Ultra Crack Filler | Sand Seal | Hard Flooring| Industrial Floor

As soon as a road is old, the process of destruction begins. Initially it develops internal cracks, small and sometimes perforated cracks are also called alligator cracks. When the cracks of different types are developed, then the process of breaking the road surface begins. As these cracks develop and avoid to become a victim of road bursts, Ultra Road Crack Filler is used for its protection. And for this purpose Ultra Sand Seal can also be used. This is an Emulsified based, water-based Ultra product that is ready to use. And you can mix the sand and May be you do not mix the sand in both ways it will work. You can repair them with Ultra Road Crack Filler and Ultra Sand Seal, even if the road is full of broken parts, alligator cracks or any other type of cracks, small or medium size cracks. Ultra Road Crack Filler and Sand Seal's repairing is temporary. This is about 6 months to 1 year after road is saved from more destruction.

Ultra Cure 603 | Surface Treatment | Hard Flooring

In such construction areas or projects, where water is not available to wet concrete, where the canal lining is done, it is done in very remote areas, the concrete is made and water is not available, there Ultra Cure 603 is beneficent. You can also apply Ultra Cure 603 spray on top of fresh concrete, or you can apply it with a brush. It has a light layer on concrete which does not allow to evaporate the moisture of the concrete. And the process of dehydration of the interior of the concrete is completed with the use of its own water. And no matter what the strength of the cement, Ultra Cure 603, is available in the packing of 5 liter and 210 liter. Ultra Cure 603 is available in 2 types of color, either colorless or white in color, and they are more durable.

Ultra Epoxy Tile Grout | Tile Grout | Construction Adhesives

Ultra Construction Epoxy Tile Grout, like the name, shows it is the grooves between the tiles. In those areas where acid-proof tiles are applied, if their grooves are filled with the common cement grouts, then they become hollow again and again as the Chemicals are applied, they expire. For all the areas that include Chemical processing areas, Chemical production plants or the laboratories where acid-proof tiles are applied, their grooves are always filled with the tile grout. Ultra epoxy tile grouts are three component-based products in which one is base, one is hardener and the third one is Aggregate. Both the three are mixed well and are applied in the grooves of the tiles. During application in the grooves of the tiles If any stain, drop or part of ultra epoxy tile grout is spilled on the tiles, then it should be cleaned immediately because it's a reliable product that if It is dried on The tile then it is very difficult to remove it from the tile.

Ultra Expanding Grout | Hard Flooring | Grouts and Anchors

Ultra Construction Expanding Grout is available in 10 kg bags. The specialty of common concrete is that it is shrinkable after it gets dry, so if you want a cheap solution for non-shrinkage of the concrete, you can use Ultra Expanding Grout at most for the big projects. Ultra Expanding uses up to 250 grams in a cement bag. And inside a cement bag, 250 grams of Ultra Expanding Grout make complete concrete non shrinkable. Ultra Expanding Grout is used to make any fragile concrete shrinkable. In addition, ultra Expanding Grout is used to make the Sewerage pipes, big bridges pillars, non shrinkalbe.