Ultra Fairing Coat | Concrete Repair | Waterproofing
Fairing Coat Mortar, a cementatious mortar that is fast setting and finely filled, is specifically designed to repair damaged concrete. Fairing Coat Mortar is made from specially selected cements, polymers and has exceptional adhesion to concrete. It also shrinks easily.
Ultra fairing Coat is two component base product that is mostly used for repairing. Any building, any structure, any bridge, if the surface of the upper part is damaged, cracks in it, light surface crack develops, it is repaired with Ultra fairing Coat. Ultra Fairing Coat has epoxy base and it is extremely durable. Once you apply it on plaster, it will results in protection of surface and structure for years.
Ultra fairing Coat is two component base product that is mostly used for repairing. Any building, any structure, any bridge, if the surface of the upper part is damaged, cracks in it, light surface crack develops, it is repaired with Ultra fairing Coat. Ultra Fairing Coat has epoxy base and it is extremely durable. Once you apply it on plaster, it will results in protection of surface and structure for years.
Related products
Ultra Plast Wall Putty | Waterproofing | Concrete Adhesives
There are many areas of Pakistan where a high level of moisture in the air is present. When the new houses are constructed the plaster doesn't dry up rapidly and until the Plaster does not dry up, you can't paint on it. The use of ultra wall putty is very advantageous for houses like these. Ultra wall putty which is a single component product that gives a paste by just adding water in it. You can apply this on the wet walls or wet plaster. After adding a layer of this, you can paint and if you don't want to paint this will look like paint in white color and beautiful. Most of the people delay shifting just because of that their houses walls and plasters are wet. Especially houses built in the winter, for all of them, Ultra wall putty is the best solution. Apply Ultra Wall Putty on the wet surfaces and shift to your home immediately.
Ultra Bitumen Emulsion | Waterprofing Floor | Construction
Ultra Construction Bitumen Emulsion is a bitumen base product which is used for waterproofing purposes. It is a single component product and is available in different packing, as it may be available in 15 kg and also available in 30 kg, 218 kg drums. Ultra Bitumen Emulsion is a ready to use product. In past to use bitumen, there is need to heat it by adding crude oil in it and it causes accidents. However Ultra Construction Chemical Private Limited has installed the latest bitumen emulsion plant in Pakistan in 2013 and this product is being used successfully all over the Pakistan. It is used to protect any cementitious structure.
If these are sewerage pipelines, sewerage pipes, or piling of bridges, it is recommended to use Bitumen Emulsion on top of all, overhead contractors, on top of NHA projects. And we have this ready-to-use product, adding more polymers to make it more durable. The Ultra Bitumen Emulsion is very durable and provides long life protection to the structure.
Ultra Corr Bond | Waterproofing | Joint Sealants | Adhesive
Ultra Construction corr Bond is used as an epoxy bonding agent which is used for new to old concrete. Like I said before, this polymer bonding agent can be used within 20 days. If our joint is 28 days old then we use polymer bonding agent SBR but if the joint is older than 28 days then for old to new concrete whether it is 10 years old or 20 years old, we recommend ultra corr Bond. Ultra corr bond is an epoxy based product and it is composed of two components. After cleaning the surface carefully, mix part A in part B and apply with the help of brush on the specific area. After applying on the joints if there is winter season then let it be in the take free position for 1 hour and then add concrete on it and if it's summer then give it 15 to 20 minutes until it maintains that free position.
If it's the summer season then you can add concrete after applying corr bond for 15 to 20 minutes. Ultra corr bond eliminates concrete joints completely and it's one of our best products.
Ultra Superplast | Concrete Admixture | Waterproofing
Like the outer world, ready mix plants in Pakistan are increasing, meaning the ready mix plants / mixture plants are installed outside the city and concrete is mixed there. That mixture is transported to the projects by the help of dumpers. In this whole process after mixing, If the concrete admixture is not mixed in it, the concrete sets inside the bowser immediately. All ready mix plants require that kind of admixture which is added in the concrete on the plant, that concrete admixture does not allow the concrete admixture to settle down for at least 2 to 3 hours. After the traveling of 2 to 3 hours when the concrete is applied to the project, then the process of setting up should be started. This process is called workability retention. Ultra has the best product which is Ultra 4 superplast 470 to provide workability retention. Ultra super plast 470 provides almost two and half hours workability of the tension, provides high strength, Increases strength of building.
Ultra Super Plast 437 | Waterproofing | Concrete Admixture
Ultra Construction Super Plast 437 is known as a Middle class Super-Plasticizer. Those areas where in summer concrete sets immediately after mixing, that concrete requires workability retention. For that, Ultra 437 is the best product. Ultra 437 is a low rate and an economical product which changes the qualities of concrete with a little increase and provides you joint-less concrete.
Ultra Super-Plast 437 is a strong concrete admixture that has been prepared using organic polymers and plasticizers. It produces strength without increasing cement content. Ultra Super-Plast 437 can be used in any construction that is exposed to low or high temperatures, chemicals, gas and fumes. It can also be used in retaining walls, swimming pools, basements.
Ultra Super-Plast 437 has the following benefits:
• It reduces the water cement ratio
• Water reduction increases compressive strength
• It helps to reduce cement content without reducing strength
Ultra Powedr 2000 |Concrete Admixture | Concrete | Waterproofing
Ultra Construction Powder 2000 is in powder shape, contains in 1KG pack. In houses, your might observed after plaster when we apply paint on walls, after some period paint start falling. Plaster have cracks with the passage of time due to weather changes. And its solution is Ultra Powder. One Ultra Powder Packet of 1KG is used in 1 Cement Pack. When you mix one pack of dry cement and dry sand, mix 1KG Ultra Powder along with them and then mix water in it for plaster and apply it. Ultra Powder is most important before apply paint to walls, to make your paint reliable for years. It also avoid cracks in outside of building plaster and also do not let moisture to enter in the building.
Ultra Powder big pack contains 10 packs of 1KG packets. You can buy it from any cement store or hardware stores in all cities of Pakistan.
Ultra Seal Flex | Waterproofing | Construction Chemicals
Ultra Construction Seal Flex is a single component product available in white color. You just have to open it and mix it in the right way so you will be find just like distemper ready to use product. Apply Ultra Seal Flex to the area where you want to use it. Ultra Seal Flex is more suitable for waterproofing of fiberglass roofs and waterproofing of asphalt roofs.
It has a very good grip with the structure. In addition, it is a very flexible product that does not crack with the movement of the structure. It provides a durable solution. Another feature of Ultra Seal Flax is that it is in white color, so it reflects a little bit of heat and we can use it for heat proofing. This dual purpose is to provide you with waterproofing and heat proofing. In summers apply second coat after 3 to 4 hours of the application of first coat. If you are doing this in winter, it is better to apply it next day. It will give you an extremely beautiful, flexible and smooth finish.
Ultra Membrane Seal | Waterproofing | Construction in Pakistan
Ultra Construction membrane seal is a very useful product for waterproofing specially on the big structures. It is a two component based product, one liquid, 5 liters and the other 10 kg powder. This 10 kg powder has to be mixed with 5 liters of liquid. You will find it as distemper after mixing both components. In fact, if the Ultra Membrane Seal is not applied before and the tiles have been laid on the roof the definitely it will have cracks in the roof, or the penetration of water is increasing.
Ultra Membrane Seal is a polymer base, it becomes part of the structure. When you put the first coat on it, it will penetrate in the structure and become the part of the structure then second coat will protect the first one and prevents movement and vibration and eliminates crashes.
Reviews
There are no reviews yet.