Ultra LSR | Large Structure Repair | Concrete Repair in Pakistan
As the name suggests, this product LSR is used for Large Structural Repair. This is a single component cement based product that is used for repairing big structures.
If the people cannot afford epoxy base repairing system due to its high cost, they can use LSR. In LSR only add water and if you need structural repair then you can apply it in general.
This product provides an extremely economical and sustainable solution for repairing bridges and other structures of heavy structures, including Pillars, Pillars of buildings, and steal pillars of buildings.
Related products
Ultra Strong M | Concrete Repairs | Waterproofing| Weather Guard
Ultra Strong M is an Epoxy Base Repairing Product. Because it consists of three components, First a base, second hardener and third aggregate. Most of the time you can see that there is a lot of heavy traffic in factories, there is movement of container with iron tires produce damage on the floor. If the floor is repaired with cement, it will not be repaired for long. If you repair it with cement it will broken soon again and again. So for such a surface we suggest Ultra strong M.
Ultra strong M is reliable and once you apply it we guarantee its durability for lifetime. Floor will never broken if Ultra Strong M is applied once on it. Ultra strong M is found in most shopping centers and factories, such as stores and warehouses. Where there is a lot of traffic or a lot of heavy load lifters run, or any other type of heavy movement handling etc.
Ultra Injection Resion | Concrete Repair | Construction Industry
Ultra Construction Injection Resion consists of two components, one is base and other is hardener. Mix both and inject them into the inner building cracks. Some of the cementitious structures, which cause cracks due to movement, or cracks due to Earthquake, or some bridges that have cracks due to poor conditioning.
All these structures can be revived by Ultra Injection Resin. Ultra Chemicals LLC USA's products are being used to repair bridges of heavy structures with great success. These cracks are injected with a high pressure machine and after injecting it, an epoxy product is filled on top of it, under the name of Ultra fairing coat product.
Ultra Fair Faced VH | Concrete Repair | Concrete Admixture
Ultra Construction Fair faced VH is a cement-based single component product. As the name suggests, if any lightweight cracks develop on the inner plaster of any cementatious structure and the honeycombing vagina develops, then we can use Ultra fair face VH. That is, they can repair it. Ultra Fair faced VH ready to use product ha. Only you can mix water with it and as simple painters apply paint, you can also use it and make your surface beautiful by applying it on the surface.
They can be easily installed to existing brick, block and stud walls or used in new construction projects as decorative feature wall panels, external facade cladding or rain screen.
Ultra Construction Chemicals' Fair Faced panels are designed to work in any commercial space or residential project and are available in different sizes and thicknesses. Ideal for both indoor and outdoor use, concrete wall panels can completely transform the look of any space, and create an exciting contemporary feel.
Ultra Bitumen Emulsion | Waterprofing Floor | Construction
Ultra Construction Bitumen Emulsion is a bitumen base product which is used for waterproofing purposes. It is a single component product and is available in different packing, as it may be available in 15 kg and also available in 30 kg, 218 kg drums. Ultra Bitumen Emulsion is a ready to use product. In past to use bitumen, there is need to heat it by adding crude oil in it and it causes accidents. However Ultra Construction Chemical Private Limited has installed the latest bitumen emulsion plant in Pakistan in 2013 and this product is being used successfully all over the Pakistan. It is used to protect any cementitious structure.
If these are sewerage pipelines, sewerage pipes, or piling of bridges, it is recommended to use Bitumen Emulsion on top of all, overhead contractors, on top of NHA projects. And we have this ready-to-use product, adding more polymers to make it more durable. The Ultra Bitumen Emulsion is very durable and provides long life protection to the structure.
Ultra Cure 603 | Surface Treatment | Hard Flooring
In such construction areas or projects, where water is not available to wet concrete, where the canal lining is done, it is done in very remote areas, the concrete is made and water is not available, there Ultra Cure 603 is beneficent.
You can also apply Ultra Cure 603 spray on top of fresh concrete, or you can apply it with a brush. It has a light layer on concrete which does not allow to evaporate the moisture of the concrete. And the process of dehydration of the interior of the concrete is completed with the use of its own water.
And no matter what the strength of the cement, Ultra Cure 603, is available in the packing of 5 liter and 210 liter. Ultra Cure 603 is available in 2 types of color, either colorless or white in color, and they are more durable.
Ultra Aerolastic Sealants | Epoxy Coating | Hardfloor | Chemical
Ultra construction Aeroelastic Sealants is a bitumen based product and this is a hot applied product because it is heated before applying. It is obvious from its name “aeroelastic” that it is used for runaways and their joints. Similarly it is also used in the airport joints and hangers.
This is the fuel resistant product which does not spoil on any kind of spill like oil or grease. Usually it is used in the top big runways of Pakistan, airports and it seems to be flexible after application and it is durable and has long life effects. It is durable and used as a long life Sealant. It is durable and used as a long life Sealant.
Ultra Fairing Coat | Concrete Repair | Waterproofing
Fairing Coat Mortar, a cementatious mortar that is fast setting and finely filled, is specifically designed to repair damaged concrete. Fairing Coat Mortar is made from specially selected cements, polymers and has exceptional adhesion to concrete. It also shrinks easily.
Ultra fairing Coat is two component base product that is mostly used for repairing. Any building, any structure, any bridge, if the surface of the upper part is damaged, cracks in it, light surface crack develops, it is repaired with Ultra fairing Coat. Ultra Fairing Coat has epoxy base and it is extremely durable. Once you apply it on plaster, it will results in protection of surface and structure for years.
Ultra PF Mortor | Concrete Repair Pakistan | Fairing Coat
Ultra Construction PF Mortor is a fiber-based cementitious repairing mortar. With the passage of time, you will see that many old buildings have been demolished and concrete or plaster has been removed. The same process is followed by the big bridges' pillars get demolished.
We can give life to all such architects with the use of Ultra PF Mortor. Ultra PF Mortor is a ready to use product that will give you the best paste material after adding water in it. And you can renew your surface by applying this single component product in a straight forward manner with the help of a simple tool, by removing the rust of the surface.
Reviews
There are no reviews yet.