Ultra Bitumen Emulsion | Waterprofing Floor | Construction
Ultra Construction Bitumen Emulsion is a bitumen base product which is used for waterproofing purposes. It is a single component product and is available in different packing, as it may be available in 15 kg and also available in 30 kg, 218 kg drums. Ultra Bitumen Emulsion is a ready to use product. In past to use bitumen, there is need to heat it by adding crude oil in it and it causes accidents. However Ultra Construction Chemical Private Limited has installed the latest bitumen emulsion plant in Pakistan in 2013 and this product is being used successfully all over the Pakistan. It is used to protect any cementitious structure.
If these are sewerage pipelines, sewerage pipes, or piling of bridges, it is recommended to use Bitumen Emulsion on top of all, overhead contractors, on top of NHA projects. And we have this ready-to-use product, adding more polymers to make it more durable. The Ultra Bitumen Emulsion is very durable and provides long life protection to the structure.
If these are sewerage pipelines, sewerage pipes, or piling of bridges, it is recommended to use Bitumen Emulsion on top of all, overhead contractors, on top of NHA projects. And we have this ready-to-use product, adding more polymers to make it more durable. The Ultra Bitumen Emulsion is very durable and provides long life protection to the structure.
Related products
Ultra Superplast | Concrete Admixture | Waterproofing
Like the outer world, ready mix plants in Pakistan are increasing, meaning the ready mix plants / mixture plants are installed outside the city and concrete is mixed there. That mixture is transported to the projects by the help of dumpers. In this whole process after mixing, If the concrete admixture is not mixed in it, the concrete sets inside the bowser immediately. All ready mix plants require that kind of admixture which is added in the concrete on the plant, that concrete admixture does not allow the concrete admixture to settle down for at least 2 to 3 hours. After the traveling of 2 to 3 hours when the concrete is applied to the project, then the process of setting up should be started. This process is called workability retention. Ultra has the best product which is Ultra 4 superplast 470 to provide workability retention. Ultra super plast 470 provides almost two and half hours workability of the tension, provides high strength, Increases strength of building.
Ultra Super Plast 437 | Waterproofing | Concrete Admixture
Ultra Construction Super Plast 437 is known as a Middle class Super-Plasticizer. Those areas where in summer concrete sets immediately after mixing, that concrete requires workability retention. For that, Ultra 437 is the best product. Ultra 437 is a low rate and an economical product which changes the qualities of concrete with a little increase and provides you joint-less concrete.
Ultra Super-Plast 437 is a strong concrete admixture that has been prepared using organic polymers and plasticizers. It produces strength without increasing cement content. Ultra Super-Plast 437 can be used in any construction that is exposed to low or high temperatures, chemicals, gas and fumes. It can also be used in retaining walls, swimming pools, basements.
Ultra Super-Plast 437 has the following benefits:
• It reduces the water cement ratio
• Water reduction increases compressive strength
• It helps to reduce cement content without reducing strength
Ultra Fairing Coat | Concrete Repair | Waterproofing
Fairing Coat Mortar, a cementatious mortar that is fast setting and finely filled, is specifically designed to repair damaged concrete. Fairing Coat Mortar is made from specially selected cements, polymers and has exceptional adhesion to concrete. It also shrinks easily.
Ultra fairing Coat is two component base product that is mostly used for repairing. Any building, any structure, any bridge, if the surface of the upper part is damaged, cracks in it, light surface crack develops, it is repaired with Ultra fairing Coat. Ultra Fairing Coat has epoxy base and it is extremely durable. Once you apply it on plaster, it will results in protection of surface and structure for years.
Ultra PU Sealants | Polyurethane Sealants | Construction
Ultra Construction Polyurethane (PU) Sealants are some of our strongest sealant technologies. Coupled with high levels of flexibility, these sealants are ideal for construction joints as well as being highly resistant to weather conditions, UV exposure and pollution.
Ultra polyurethane sealants are available in two forms, one is a single component which is a 600 ml tube, second is available in two components. Like the big buildings or a big cementitious structure or runways or roads, expansion joints are made which are very important for the building movement. We suggest polyurethane sealants for the joints of these buildings. Polyurethane sealant either in a single component or in two components, their outcome is the same. The main difference is only that 2 components sealants are mainly used in bulk while the single component is used to fill the gaps of windows or the expansion joints of buildings by using guns.
Ultra Cure 603 | Surface Treatment | Hard Flooring
In such construction areas or projects, where water is not available to wet concrete, where the canal lining is done, it is done in very remote areas, the concrete is made and water is not available, there Ultra Cure 603 is beneficent.
You can also apply Ultra Cure 603 spray on top of fresh concrete, or you can apply it with a brush. It has a light layer on concrete which does not allow to evaporate the moisture of the concrete. And the process of dehydration of the interior of the concrete is completed with the use of its own water.
And no matter what the strength of the cement, Ultra Cure 603, is available in the packing of 5 liter and 210 liter. Ultra Cure 603 is available in 2 types of color, either colorless or white in color, and they are more durable.
Ultra LSR | Large Structure Repair | Concrete Repair in Pakistan
As the name suggests, this product LSR is used for Large Structural Repair. This is a single component cement based product that is used for repairing big structures.
If the people cannot afford epoxy base repairing system due to its high cost, they can use LSR. In LSR only add water and if you need structural repair then you can apply it in general.
This product provides an extremely economical and sustainable solution for repairing bridges and other structures of heavy structures, including Pillars, Pillars of buildings, and steal pillars of buildings.
Ultra Corr Bond | Waterproofing | Joint Sealants | Adhesive
Ultra Construction corr Bond is used as an epoxy bonding agent which is used for new to old concrete. Like I said before, this polymer bonding agent can be used within 20 days. If our joint is 28 days old then we use polymer bonding agent SBR but if the joint is older than 28 days then for old to new concrete whether it is 10 years old or 20 years old, we recommend ultra corr Bond. Ultra corr bond is an epoxy based product and it is composed of two components. After cleaning the surface carefully, mix part A in part B and apply with the help of brush on the specific area. After applying on the joints if there is winter season then let it be in the take free position for 1 hour and then add concrete on it and if it's summer then give it 15 to 20 minutes until it maintains that free position.
If it's the summer season then you can add concrete after applying corr bond for 15 to 20 minutes. Ultra corr bond eliminates concrete joints completely and it's one of our best products.
Ultra Seal Flex | Waterproofing | Construction Chemicals
Ultra Construction Seal Flex is a single component product available in white color. You just have to open it and mix it in the right way so you will be find just like distemper ready to use product. Apply Ultra Seal Flex to the area where you want to use it. Ultra Seal Flex is more suitable for waterproofing of fiberglass roofs and waterproofing of asphalt roofs.
It has a very good grip with the structure. In addition, it is a very flexible product that does not crack with the movement of the structure. It provides a durable solution. Another feature of Ultra Seal Flax is that it is in white color, so it reflects a little bit of heat and we can use it for heat proofing. This dual purpose is to provide you with waterproofing and heat proofing. In summers apply second coat after 3 to 4 hours of the application of first coat. If you are doing this in winter, it is better to apply it next day. It will give you an extremely beautiful, flexible and smooth finish.
Reviews
There are no reviews yet.