Ultra Superplast | Concrete Admixture | Waterproofing
Like the outer world, ready mix plants in Pakistan are increasing, meaning the ready mix plants / mixture plants are installed outside the city and concrete is mixed there. That mixture is transported to the projects by the help of dumpers. In this whole process after mixing, If the concrete admixture is not mixed in it, the concrete sets inside the bowser immediately. All ready mix plants require that kind of admixture which is added in the concrete on the plant, that concrete admixture does not allow the concrete admixture to settle down for at least 2 to 3 hours. After the traveling of 2 to 3 hours when the concrete is applied to the project, then the process of setting up should be started. This process is called workability retention. Ultra has the best product which is Ultra 4 superplast 470 to provide workability retention. Ultra super plast 470 provides almost two and half hours workability of the tension, provides high strength, Increases strength of building.
Related products
Ultra Weather Guard | Water Repellent | Waterproofing
Ultra weather guard is used as a water repellent. This is a single component product, which will make you look like water. Some people has made, big beautiful buildings which is made of red colored bricks, which is called Gutka bricks. Some of these use marbles outside of their buildings, but all of them are absorb water, as it is raining on top of them, this water penetrates its interior and building.
For the solution of all these, Ultra has adopted the name of its product Weather Guard. This single component is available in a completely transparent color and can be applied with a brush after cleaning the surface properly or we can apply it with a spray. In other words, it prevents 100% of water penetration. And this product of Ultra stays effective for at least 15 years.
Ultra Corr Bond | Waterproofing | Joint Sealants | Adhesive
Ultra Construction corr Bond is used as an epoxy bonding agent which is used for new to old concrete. Like I said before, this polymer bonding agent can be used within 20 days. If our joint is 28 days old then we use polymer bonding agent SBR but if the joint is older than 28 days then for old to new concrete whether it is 10 years old or 20 years old, we recommend ultra corr Bond. Ultra corr bond is an epoxy based product and it is composed of two components. After cleaning the surface carefully, mix part A in part B and apply with the help of brush on the specific area. After applying on the joints if there is winter season then let it be in the take free position for 1 hour and then add concrete on it and if it's summer then give it 15 to 20 minutes until it maintains that free position.
If it's the summer season then you can add concrete after applying corr bond for 15 to 20 minutes. Ultra corr bond eliminates concrete joints completely and it's one of our best products.
Tile Bond
"Tile Bond" Roof Tile Adhesive is a portable one-component polyurethane foam adhesive for attaching concrete and clay roof tiles. Packaged in a self-contained disposable can or canister, it is quicker and easier to install compared to traditional attachment methods such as screws, mortar, wire ties and clips.
Ultra Powedr 2000 |Concrete Admixture | Concrete | Waterproofing
Ultra Construction Powder 2000 is in powder shape, contains in 1KG pack. In houses, your might observed after plaster when we apply paint on walls, after some period paint start falling. Plaster have cracks with the passage of time due to weather changes. And its solution is Ultra Powder. One Ultra Powder Packet of 1KG is used in 1 Cement Pack. When you mix one pack of dry cement and dry sand, mix 1KG Ultra Powder along with them and then mix water in it for plaster and apply it. Ultra Powder is most important before apply paint to walls, to make your paint reliable for years. It also avoid cracks in outside of building plaster and also do not let moisture to enter in the building.
Ultra Powder big pack contains 10 packs of 1KG packets. You can buy it from any cement store or hardware stores in all cities of Pakistan.
Ultra Strong M | Concrete Repairs | Waterproofing| Weather Guard
Ultra Strong M is an Epoxy Base Repairing Product. Because it consists of three components, First a base, second hardener and third aggregate. Most of the time you can see that there is a lot of heavy traffic in factories, there is movement of container with iron tires produce damage on the floor. If the floor is repaired with cement, it will not be repaired for long. If you repair it with cement it will broken soon again and again. So for such a surface we suggest Ultra strong M.
Ultra strong M is reliable and once you apply it we guarantee its durability for lifetime. Floor will never broken if Ultra Strong M is applied once on it. Ultra strong M is found in most shopping centers and factories, such as stores and warehouses. Where there is a lot of traffic or a lot of heavy load lifters run, or any other type of heavy movement handling etc.
Ultra Super Plast 437 | Waterproofing | Concrete Admixture
Ultra Construction Super Plast 437 is known as a Middle class Super-Plasticizer. Those areas where in summer concrete sets immediately after mixing, that concrete requires workability retention. For that, Ultra 437 is the best product. Ultra 437 is a low rate and an economical product which changes the qualities of concrete with a little increase and provides you joint-less concrete.
Ultra Super-Plast 437 is a strong concrete admixture that has been prepared using organic polymers and plasticizers. It produces strength without increasing cement content. Ultra Super-Plast 437 can be used in any construction that is exposed to low or high temperatures, chemicals, gas and fumes. It can also be used in retaining walls, swimming pools, basements.
Ultra Super-Plast 437 has the following benefits:
• It reduces the water cement ratio
• Water reduction increases compressive strength
• It helps to reduce cement content without reducing strength
Ultra Accelerator 727 | Power 1100 | | Waterproof| Joint Sealant
The shuttering of every concrete structure Is opened at least 10 to 15 days after pouring. When you want to open the shattering early on fast track projects, Usually in the winter, more than 10 to15 days may require more than 20 to 25 for 30 days are required to open the shuttering. Ultra accelerators are used for all these kinds of concrete. Ultra admixtures 727 is a complete mixture for Fast Track Projects Which is a naphthalene Product. In the concrete it should be added From 500ml per bag To 1 litre per bag Along with water in the mixture.There is one precaution with it thatAs you add concrete admixture Then the amount of water Should be reduced that means That in usual cases if you Are adding 25 litre of water Then with accelerator 727 the amount of water ship the 15 litre. That means the main purpose of concrete admixture is Water reduction And this Ultra accelerator 727 Does Height water reduction.
Ultra Waterproofing | Waterproof Flooring | Waterproof Concrete
Ultra Construction waterproof 625 is a Concrete admixture. Like the name, it is obvious that if You want to make your concrete waterproof, porous free, then use 400 ml to 500 ml Per bag of cement concrete of Ultra Waterproof 625. Ultra waterproof 625 besides waterproofing, also enhances the strength of concrete. Ultra waterproof 625 is available in 5 liters, 30 liters, 210 liters, And 1000 liter packing.
Features / Advantages:
• Ultra Waterproof 625 is easily mixed with cement, cures to a hard, tough, wear-resistant surface & bonds (adheres) strongly to most of the building materials.
• It is strongly to most of the building materials.
• It can be over coated by exterior emulsion coating or cement-based paints. It can be applied to uniform thickness coating on horizontal and vertical surfaces.
• Ultra Waterproof 625 allows trapped water vapor to escape and prevents blistering and adhesion failure.
• It makes cement mortar or coating compact, thus preventing salt penetration into the concrete.
Reviews
There are no reviews yet.