Ultra Waterproofing | Waterproof Flooring | Waterproof Concrete
Ultra Construction waterproof 625 is a Concrete admixture. Like the name, it is obvious that if You want to make your concrete waterproof, porous free, then use 400 ml to 500 ml Per bag of cement concrete of Ultra Waterproof 625. Ultra waterproof 625 besides waterproofing, also enhances the strength of concrete. Ultra waterproof 625 is available in 5 liters, 30 liters, 210 liters, And 1000 liter packing.
Features / Advantages:
• Ultra Waterproof 625 is easily mixed with cement, cures to a hard, tough, wear-resistant surface & bonds (adheres) strongly to most of the building materials.
• It is strongly to most of the building materials.
• It can be over coated by exterior emulsion coating or cement-based paints. It can be applied to uniform thickness coating on horizontal and vertical surfaces.
• Ultra Waterproof 625 allows trapped water vapor to escape and prevents blistering and adhesion failure.
• It makes cement mortar or coating compact, thus preventing salt penetration into the concrete.
Related products
Ultra Accelerator 727 | Power 1100 | | Waterproof| Joint Sealant
The shuttering of every concrete structure Is opened at least 10 to 15 days after pouring. When you want to open the shattering early on fast track projects, Usually in the winter, more than 10 to15 days may require more than 20 to 25 for 30 days are required to open the shuttering. Ultra accelerators are used for all these kinds of concrete. Ultra admixtures 727 is a complete mixture for Fast Track Projects Which is a naphthalene Product. In the concrete it should be added From 500ml per bag To 1 litre per bag Along with water in the mixture.There is one precaution with it thatAs you add concrete admixture Then the amount of water Should be reduced that means That in usual cases if you Are adding 25 litre of water Then with accelerator 727 the amount of water ship the 15 litre. That means the main purpose of concrete admixture is Water reduction And this Ultra accelerator 727 Does Height water reduction.
Ultra Powedr 2000 |Concrete Admixture | Concrete | Waterproofing
Ultra Construction Powder 2000 is in powder shape, contains in 1KG pack. In houses, your might observed after plaster when we apply paint on walls, after some period paint start falling. Plaster have cracks with the passage of time due to weather changes. And its solution is Ultra Powder. One Ultra Powder Packet of 1KG is used in 1 Cement Pack. When you mix one pack of dry cement and dry sand, mix 1KG Ultra Powder along with them and then mix water in it for plaster and apply it. Ultra Powder is most important before apply paint to walls, to make your paint reliable for years. It also avoid cracks in outside of building plaster and also do not let moisture to enter in the building.
Ultra Powder big pack contains 10 packs of 1KG packets. You can buy it from any cement store or hardware stores in all cities of Pakistan.
Tile Bond
"Tile Bond" Roof Tile Adhesive is a portable one-component polyurethane foam adhesive for attaching concrete and clay roof tiles. Packaged in a self-contained disposable can or canister, it is quicker and easier to install compared to traditional attachment methods such as screws, mortar, wire ties and clips.
Unicorn Seal K1 waterproofing chemical
Unicorn Seal K1 is two component elastomeric cement based waterproofing coating.
Unicorn Seal K-1
Unicorn Seal K-1 is a waterproof protective coating which has high flexibility. It is also known as two components coating which is polymer modified and cement based elastomeric waterproof protective coating normally used for the purpose of concrete waterproofing. Because of its excellent adhesion, weatherproofing and waterproofing properties and abrasion resistance qualities seamless protective area is ensured. Unicorn Seal K-1 ,waterproofing chemical ,can apply both on vertical and horizontal surfaces it is considered an economical way of waterproofing comparatively and also known as polymer-modified cement-based protective coating. Before Unicorn seal K1 waterproofing chemical coating or application the substrate must be sound, properly cleaned and free from all voids and cracks. Bond breakers like oil, grease and dirt particles, water repellents must also be cleaned property before this cementitious coating.
This waterproofing chemical material may be applied by brush, roller, troweled it depend upon the type of application and project specifications. Its shelf life is 12 months and it must be stored at 35° C or below in a shaded environment. The liquid component of this product must not be allowed to freeze. If it is stored at high temperature then its shelf life will be reduced.
Unicorn Seal K-1 is coated in below mentioned surfaces both vertically and horizontally:
- Water structures
- Sewage treatment plants
- Basement walls
- Balconies, Plazas, deck
- Underneath tile adhesive mortars
- Wastewater treating plants
- Reinforced concrete structure
- Water tanks and reservoir
- All similar works
Advantages of Unicorn Seal K-1
With the help of this waterproofing product large static or dynamic cracks can easily be sealed it also bridges shrinkage cracks. This waterproofing product is exposed or applied on required surface with flexible or rigid mortars in order to bring uniform appearance. There are several advantages of this admixture mentioned below:Easy to use and apply:
This waterproofing material can easily be applied on the required surface and ensure the safety of worker and the required results can easily be achieved with the application of this waterproofing product.Environmental friendly:
This waterproofing coating is considered as environment friendly material because it has no adverse effect on environment and also does not effect the health of residents of the building.UV Stable:
This waterproofing chemical coating is UV-stable coating that avoids ultraviolet radiation by sun which is harmful to humans and materials.Flexibility:
Flexibility is one of the major advantage of Unicorn Seal K-1. Because of this advantage the chances of exposed crack are reduced to minimized and there is no way for water to enter. Flexibility makes if durable and there is no effect of thermal expansion and contraction.Others:
- Resist hydro static pressure
- Crack bridging ability
- Enable substrate to breath
- Can also be applied to damp surfaces
- Abrasion resistant
- Self-curing material
- Active barrier for water and Carbon dioxide
Ultra Tile Grout | Construction Chemicals | Waterproof Flooring
Ultra Construction Tile Grout Joint Filler is polymer-modified, waterproof tile grout for grouting between ceramic tiles after the adhesive has set. It is produced from carefully selected raw materials for consistency of product, hardens in 24 hours.
Ultra Tile Grout is a blend of specially selected cements, fillers and synthetic organic polymers. When added to water it readily blends to produce a smooth creamy paste which is water and mold resistant.
Ultra tile grout is one of the best Ultra Construction Chemical products. Ultra tile grout is available in a 1 kg package and it is available in all colors by matching up all tiles with all colors. All the 1kg packs are packed inside are 10 kg packs. Ultra tile grout is mainly used for the filling of tiles that is applied to the growth of the tiles and it is a cement-based product. It's ready to use product You just have to add water then you will have the best cement-based tile grout containing all the polymers.
Ultra Superplast | Concrete Admixture | Waterproofing
Like the outer world, ready mix plants in Pakistan are increasing, meaning the ready mix plants / mixture plants are installed outside the city and concrete is mixed there. That mixture is transported to the projects by the help of dumpers. In this whole process after mixing, If the concrete admixture is not mixed in it, the concrete sets inside the bowser immediately. All ready mix plants require that kind of admixture which is added in the concrete on the plant, that concrete admixture does not allow the concrete admixture to settle down for at least 2 to 3 hours. After the traveling of 2 to 3 hours when the concrete is applied to the project, then the process of setting up should be started. This process is called workability retention. Ultra has the best product which is Ultra 4 superplast 470 to provide workability retention. Ultra super plast 470 provides almost two and half hours workability of the tension, provides high strength, Increases strength of building.
Reviews
There are no reviews yet.