Ultra Super Plast 437 | Waterproofing | Concrete Admixture
Ultra Construction Super Plast 437 is known as a Middle class Super-Plasticizer. Those areas where in summer concrete sets immediately after mixing, that concrete requires workability retention. For that, Ultra 437 is the best product. Ultra 437 is a low rate and an economical product which changes the qualities of concrete with a little increase and provides you joint-less concrete.
Ultra Super-Plast 437 is a strong concrete admixture that has been prepared using organic polymers and plasticizers. It produces strength without increasing cement content. Ultra Super-Plast 437 can be used in any construction that is exposed to low or high temperatures, chemicals, gas and fumes. It can also be used in retaining walls, swimming pools, basements.
Ultra Super-Plast 437 has the following benefits:
• It reduces the water cement ratio
• Water reduction increases compressive strength
• It helps to reduce cement content without reducing strength
Ultra Super-Plast 437 is a strong concrete admixture that has been prepared using organic polymers and plasticizers. It produces strength without increasing cement content. Ultra Super-Plast 437 can be used in any construction that is exposed to low or high temperatures, chemicals, gas and fumes. It can also be used in retaining walls, swimming pools, basements.
Ultra Super-Plast 437 has the following benefits:
• It reduces the water cement ratio
• Water reduction increases compressive strength
• It helps to reduce cement content without reducing strength
Related products
Ultra Corr Bond | Waterproofing | Joint Sealants | Adhesive
Ultra Construction corr Bond is used as an epoxy bonding agent which is used for new to old concrete. Like I said before, this polymer bonding agent can be used within 20 days. If our joint is 28 days old then we use polymer bonding agent SBR but if the joint is older than 28 days then for old to new concrete whether it is 10 years old or 20 years old, we recommend ultra corr Bond. Ultra corr bond is an epoxy based product and it is composed of two components. After cleaning the surface carefully, mix part A in part B and apply with the help of brush on the specific area. After applying on the joints if there is winter season then let it be in the take free position for 1 hour and then add concrete on it and if it's summer then give it 15 to 20 minutes until it maintains that free position.
If it's the summer season then you can add concrete after applying corr bond for 15 to 20 minutes. Ultra corr bond eliminates concrete joints completely and it's one of our best products.
Ultra Seal Flex | Waterproofing | Construction Chemicals
Ultra Construction Seal Flex is a single component product available in white color. You just have to open it and mix it in the right way so you will be find just like distemper ready to use product. Apply Ultra Seal Flex to the area where you want to use it. Ultra Seal Flex is more suitable for waterproofing of fiberglass roofs and waterproofing of asphalt roofs.
It has a very good grip with the structure. In addition, it is a very flexible product that does not crack with the movement of the structure. It provides a durable solution. Another feature of Ultra Seal Flax is that it is in white color, so it reflects a little bit of heat and we can use it for heat proofing. This dual purpose is to provide you with waterproofing and heat proofing. In summers apply second coat after 3 to 4 hours of the application of first coat. If you are doing this in winter, it is better to apply it next day. It will give you an extremely beautiful, flexible and smooth finish.
Ultra Fairing Coat | Concrete Repair | Waterproofing
Fairing Coat Mortar, a cementatious mortar that is fast setting and finely filled, is specifically designed to repair damaged concrete. Fairing Coat Mortar is made from specially selected cements, polymers and has exceptional adhesion to concrete. It also shrinks easily.
Ultra fairing Coat is two component base product that is mostly used for repairing. Any building, any structure, any bridge, if the surface of the upper part is damaged, cracks in it, light surface crack develops, it is repaired with Ultra fairing Coat. Ultra Fairing Coat has epoxy base and it is extremely durable. Once you apply it on plaster, it will results in protection of surface and structure for years.
Ultra Strong M | Concrete Repairs | Waterproofing| Weather Guard
Ultra Strong M is an Epoxy Base Repairing Product. Because it consists of three components, First a base, second hardener and third aggregate. Most of the time you can see that there is a lot of heavy traffic in factories, there is movement of container with iron tires produce damage on the floor. If the floor is repaired with cement, it will not be repaired for long. If you repair it with cement it will broken soon again and again. So for such a surface we suggest Ultra strong M.
Ultra strong M is reliable and once you apply it we guarantee its durability for lifetime. Floor will never broken if Ultra Strong M is applied once on it. Ultra strong M is found in most shopping centers and factories, such as stores and warehouses. Where there is a lot of traffic or a lot of heavy load lifters run, or any other type of heavy movement handling etc.
Ultra Fair Faced VH | Concrete Repair | Concrete Admixture
Ultra Construction Fair faced VH is a cement-based single component product. As the name suggests, if any lightweight cracks develop on the inner plaster of any cementatious structure and the honeycombing vagina develops, then we can use Ultra fair face VH. That is, they can repair it. Ultra Fair faced VH ready to use product ha. Only you can mix water with it and as simple painters apply paint, you can also use it and make your surface beautiful by applying it on the surface.
They can be easily installed to existing brick, block and stud walls or used in new construction projects as decorative feature wall panels, external facade cladding or rain screen.
Ultra Construction Chemicals' Fair Faced panels are designed to work in any commercial space or residential project and are available in different sizes and thicknesses. Ideal for both indoor and outdoor use, concrete wall panels can completely transform the look of any space, and create an exciting contemporary feel.
Tile Bond
"Tile Bond" Roof Tile Adhesive is a portable one-component polyurethane foam adhesive for attaching concrete and clay roof tiles. Packaged in a self-contained disposable can or canister, it is quicker and easier to install compared to traditional attachment methods such as screws, mortar, wire ties and clips.
Ultra Waterproofing | Waterproof Flooring | Waterproof Concrete
Ultra Construction waterproof 625 is a Concrete admixture. Like the name, it is obvious that if You want to make your concrete waterproof, porous free, then use 400 ml to 500 ml Per bag of cement concrete of Ultra Waterproof 625. Ultra waterproof 625 besides waterproofing, also enhances the strength of concrete. Ultra waterproof 625 is available in 5 liters, 30 liters, 210 liters, And 1000 liter packing.
Features / Advantages:
• Ultra Waterproof 625 is easily mixed with cement, cures to a hard, tough, wear-resistant surface & bonds (adheres) strongly to most of the building materials.
• It is strongly to most of the building materials.
• It can be over coated by exterior emulsion coating or cement-based paints. It can be applied to uniform thickness coating on horizontal and vertical surfaces.
• Ultra Waterproof 625 allows trapped water vapor to escape and prevents blistering and adhesion failure.
• It makes cement mortar or coating compact, thus preventing salt penetration into the concrete.
Ultra Superplast | Concrete Admixture | Waterproofing
Like the outer world, ready mix plants in Pakistan are increasing, meaning the ready mix plants / mixture plants are installed outside the city and concrete is mixed there. That mixture is transported to the projects by the help of dumpers. In this whole process after mixing, If the concrete admixture is not mixed in it, the concrete sets inside the bowser immediately. All ready mix plants require that kind of admixture which is added in the concrete on the plant, that concrete admixture does not allow the concrete admixture to settle down for at least 2 to 3 hours. After the traveling of 2 to 3 hours when the concrete is applied to the project, then the process of setting up should be started. This process is called workability retention. Ultra has the best product which is Ultra 4 superplast 470 to provide workability retention. Ultra super plast 470 provides almost two and half hours workability of the tension, provides high strength, Increases strength of building.
Reviews
There are no reviews yet.