Bitu Seal M100
₨299
Bitu seal M100 plastic is a heavy-duty mastic sealer and repair compound. Bitu seal plastic may be used to seal most roofing defects: sheeting laps, valleys, gutters, down-pipes, enlarged screw holes, to repair roof cracks, flashings, cracked tiles and patch repairs to tanks.
Categories: Bitumen Coating, Concrete Admixtures, Unicorn
Related products
Ultra Plast Wall Putty | Waterproofing | Concrete Adhesives
There are many areas of Pakistan where a high level of moisture in the air is present. When the new houses are constructed the plaster doesn't dry up rapidly and until the Plaster does not dry up, you can't paint on it. The use of ultra wall putty is very advantageous for houses like these. Ultra wall putty which is a single component product that gives a paste by just adding water in it. You can apply this on the wet walls or wet plaster. After adding a layer of this, you can paint and if you don't want to paint this will look like paint in white color and beautiful. Most of the people delay shifting just because of that their houses walls and plasters are wet. Especially houses built in the winter, for all of them, Ultra wall putty is the best solution. Apply Ultra Wall Putty on the wet surfaces and shift to your home immediately.
Tile Bond
₨300
"Tile Bond" Roof Tile Adhesive is a portable one-component polyurethane foam adhesive for attaching concrete and clay roof tiles. Packaged in a self-contained disposable can or canister, it is quicker and easier to install compared to traditional attachment methods such as screws, mortar, wire ties and clips.
Bitumen Emulsion
₨18,000
Bitumen emulsion is a liquefied type of bitumen with a low viscosity. By dispersing bitumen in water and adding an emulsifier, ordinary bitumen turns into a low viscosity liquid that can easily be used in a variety of applications, including repairing and maintaining roads, waterproofing, spraying, etc.
PU Joint Sealents
₨650
Ultra Accelerator 727 | Power 1100 | | Waterproof| Joint Sealant
The shuttering of every concrete structure Is opened at least 10 to 15 days after pouring. When you want to open the shattering early on fast track projects, Usually in the winter, more than 10 to15 days may require more than 20 to 25 for 30 days are required to open the shuttering. Ultra accelerators are used for all these kinds of concrete. Ultra admixtures 727 is a complete mixture for Fast Track Projects Which is a naphthalene Product. In the concrete it should be added From 500ml per bag To 1 litre per bag Along with water in the mixture.There is one precaution with it thatAs you add concrete admixture Then the amount of water Should be reduced that means That in usual cases if you Are adding 25 litre of water Then with accelerator 727 the amount of water ship the 15 litre. That means the main purpose of concrete admixture is Water reduction And this Ultra accelerator 727 Does Height water reduction.
Bitumen Membrane Sheet
Rated 5.00 out of 5
₨4,000
Hygrip Membrane Roll
₨5,800
Hy-Grip modified bituminous membranes meet the highest international quality standards and are suitable for a wide range of applications. Roofs, re-roofing, accessible and non-accessible roofs, vehicle parking decks, and a range of additional applications in the home and industrial sectors are all covered by Hy-Grip membranes.
Ultra Superplast | Concrete Admixture | Waterproofing
Like the outer world, ready mix plants in Pakistan are increasing, meaning the ready mix plants / mixture plants are installed outside the city and concrete is mixed there. That mixture is transported to the projects by the help of dumpers. In this whole process after mixing, If the concrete admixture is not mixed in it, the concrete sets inside the bowser immediately. All ready mix plants require that kind of admixture which is added in the concrete on the plant, that concrete admixture does not allow the concrete admixture to settle down for at least 2 to 3 hours. After the traveling of 2 to 3 hours when the concrete is applied to the project, then the process of setting up should be started. This process is called workability retention. Ultra has the best product which is Ultra 4 superplast 470 to provide workability retention. Ultra super plast 470 provides almost two and half hours workability of the tension, provides high strength, Increases strength of building.
Reviews
There are no reviews yet.