Ultra Superplast | Concrete Admixture | Waterproofing
Like the outer world, ready mix plants in Pakistan are increasing, meaning the ready mix plants / mixture plants are installed outside the city and concrete is mixed there. That mixture is transported to the projects by the help of dumpers. In this whole process after mixing, If the concrete admixture is not mixed in it, the concrete sets inside the bowser immediately. All ready mix plants require that kind of admixture which is added in the concrete on the plant, that concrete admixture does not allow the concrete admixture to settle down for at least 2 to 3 hours. After the traveling of 2 to 3 hours when the concrete is applied to the project, then the process of setting up should be started. This process is called workability retention. Ultra has the best product which is Ultra 4 superplast 470 to provide workability retention. Ultra super plast 470 provides almost two and half hours workability of the tension, provides high strength, Increases strength of building.
Related products
Ultra Plast Wall Putty | Waterproofing | Concrete Adhesives
There are many areas of Pakistan where a high level of moisture in the air is present. When the new houses are constructed the plaster doesn't dry up rapidly and until the Plaster does not dry up, you can't paint on it. The use of ultra wall putty is very advantageous for houses like these. Ultra wall putty which is a single component product that gives a paste by just adding water in it. You can apply this on the wet walls or wet plaster. After adding a layer of this, you can paint and if you don't want to paint this will look like paint in white color and beautiful. Most of the people delay shifting just because of that their houses walls and plasters are wet. Especially houses built in the winter, for all of them, Ultra wall putty is the best solution. Apply Ultra Wall Putty on the wet surfaces and shift to your home immediately.
Ultra Fairing Coat | Concrete Repair | Waterproofing
Fairing Coat Mortar, a cementatious mortar that is fast setting and finely filled, is specifically designed to repair damaged concrete. Fairing Coat Mortar is made from specially selected cements, polymers and has exceptional adhesion to concrete. It also shrinks easily.
Ultra fairing Coat is two component base product that is mostly used for repairing. Any building, any structure, any bridge, if the surface of the upper part is damaged, cracks in it, light surface crack develops, it is repaired with Ultra fairing Coat. Ultra Fairing Coat has epoxy base and it is extremely durable. Once you apply it on plaster, it will results in protection of surface and structure for years.
Ultra Seal Flex | Waterproofing | Construction Chemicals
Ultra Construction Seal Flex is a single component product available in white color. You just have to open it and mix it in the right way so you will be find just like distemper ready to use product. Apply Ultra Seal Flex to the area where you want to use it. Ultra Seal Flex is more suitable for waterproofing of fiberglass roofs and waterproofing of asphalt roofs.
It has a very good grip with the structure. In addition, it is a very flexible product that does not crack with the movement of the structure. It provides a durable solution. Another feature of Ultra Seal Flax is that it is in white color, so it reflects a little bit of heat and we can use it for heat proofing. This dual purpose is to provide you with waterproofing and heat proofing. In summers apply second coat after 3 to 4 hours of the application of first coat. If you are doing this in winter, it is better to apply it next day. It will give you an extremely beautiful, flexible and smooth finish.
Ultra Waterproofing | Waterproof Flooring | Waterproof Concrete
Ultra Construction waterproof 625 is a Concrete admixture. Like the name, it is obvious that if You want to make your concrete waterproof, porous free, then use 400 ml to 500 ml Per bag of cement concrete of Ultra Waterproof 625. Ultra waterproof 625 besides waterproofing, also enhances the strength of concrete. Ultra waterproof 625 is available in 5 liters, 30 liters, 210 liters, And 1000 liter packing.
Features / Advantages:
• Ultra Waterproof 625 is easily mixed with cement, cures to a hard, tough, wear-resistant surface & bonds (adheres) strongly to most of the building materials.
• It is strongly to most of the building materials.
• It can be over coated by exterior emulsion coating or cement-based paints. It can be applied to uniform thickness coating on horizontal and vertical surfaces.
• Ultra Waterproof 625 allows trapped water vapor to escape and prevents blistering and adhesion failure.
• It makes cement mortar or coating compact, thus preventing salt penetration into the concrete.
Tile Bond
"Tile Bond" Roof Tile Adhesive is a portable one-component polyurethane foam adhesive for attaching concrete and clay roof tiles. Packaged in a self-contained disposable can or canister, it is quicker and easier to install compared to traditional attachment methods such as screws, mortar, wire ties and clips.
Ultra Bitumen Emulsion | Waterprofing Floor | Construction
Ultra Construction Bitumen Emulsion is a bitumen base product which is used for waterproofing purposes. It is a single component product and is available in different packing, as it may be available in 15 kg and also available in 30 kg, 218 kg drums. Ultra Bitumen Emulsion is a ready to use product. In past to use bitumen, there is need to heat it by adding crude oil in it and it causes accidents. However Ultra Construction Chemical Private Limited has installed the latest bitumen emulsion plant in Pakistan in 2013 and this product is being used successfully all over the Pakistan. It is used to protect any cementitious structure.
If these are sewerage pipelines, sewerage pipes, or piling of bridges, it is recommended to use Bitumen Emulsion on top of all, overhead contractors, on top of NHA projects. And we have this ready-to-use product, adding more polymers to make it more durable. The Ultra Bitumen Emulsion is very durable and provides long life protection to the structure.
Ultra Membrane Seal | Waterproofing | Construction in Pakistan
Ultra Construction membrane seal is a very useful product for waterproofing specially on the big structures. It is a two component based product, one liquid, 5 liters and the other 10 kg powder. This 10 kg powder has to be mixed with 5 liters of liquid. You will find it as distemper after mixing both components. In fact, if the Ultra Membrane Seal is not applied before and the tiles have been laid on the roof the definitely it will have cracks in the roof, or the penetration of water is increasing.
Ultra Membrane Seal is a polymer base, it becomes part of the structure. When you put the first coat on it, it will penetrate in the structure and become the part of the structure then second coat will protect the first one and prevents movement and vibration and eliminates crashes.
Ultra Fair Faced VH | Concrete Repair | Concrete Admixture
Ultra Construction Fair faced VH is a cement-based single component product. As the name suggests, if any lightweight cracks develop on the inner plaster of any cementatious structure and the honeycombing vagina develops, then we can use Ultra fair face VH. That is, they can repair it. Ultra Fair faced VH ready to use product ha. Only you can mix water with it and as simple painters apply paint, you can also use it and make your surface beautiful by applying it on the surface.
They can be easily installed to existing brick, block and stud walls or used in new construction projects as decorative feature wall panels, external facade cladding or rain screen.
Ultra Construction Chemicals' Fair Faced panels are designed to work in any commercial space or residential project and are available in different sizes and thicknesses. Ideal for both indoor and outdoor use, concrete wall panels can completely transform the look of any space, and create an exciting contemporary feel.
Reviews
There are no reviews yet.