Ultra Weather Guard | Water Repellent | Waterproofing
Ultra weather guard is used as a water repellent. This is a single component product, which will make you look like water. Some people has made, big beautiful buildings which is made of red colored bricks, which is called Gutka bricks. Some of these use marbles outside of their buildings, but all of them are absorb water, as it is raining on top of them, this water penetrates its interior and building.
For the solution of all these, Ultra has adopted the name of its product Weather Guard. This single component is available in a completely transparent color and can be applied with a brush after cleaning the surface properly or we can apply it with a spray. In other words, it prevents 100% of water penetration. And this product of Ultra stays effective for at least 15 years.
Related products
Ultra Plast Wall Putty | Waterproofing | Concrete Adhesives
There are many areas of Pakistan where a high level of moisture in the air is present. When the new houses are constructed the plaster doesn't dry up rapidly and until the Plaster does not dry up, you can't paint on it. The use of ultra wall putty is very advantageous for houses like these. Ultra wall putty which is a single component product that gives a paste by just adding water in it. You can apply this on the wet walls or wet plaster. After adding a layer of this, you can paint and if you don't want to paint this will look like paint in white color and beautiful. Most of the people delay shifting just because of that their houses walls and plasters are wet. Especially houses built in the winter, for all of them, Ultra wall putty is the best solution. Apply Ultra Wall Putty on the wet surfaces and shift to your home immediately.
Ultra Superplast | Concrete Admixture | Waterproofing
Like the outer world, ready mix plants in Pakistan are increasing, meaning the ready mix plants / mixture plants are installed outside the city and concrete is mixed there. That mixture is transported to the projects by the help of dumpers. In this whole process after mixing, If the concrete admixture is not mixed in it, the concrete sets inside the bowser immediately. All ready mix plants require that kind of admixture which is added in the concrete on the plant, that concrete admixture does not allow the concrete admixture to settle down for at least 2 to 3 hours. After the traveling of 2 to 3 hours when the concrete is applied to the project, then the process of setting up should be started. This process is called workability retention. Ultra has the best product which is Ultra 4 superplast 470 to provide workability retention. Ultra super plast 470 provides almost two and half hours workability of the tension, provides high strength, Increases strength of building.
Merit seal Polyurethane chemical
Merit Seal Polyurethane Waterproofing Chemical is a high-performance, liquid-applied membrane specifically engineered to deliver long-lasting protection against water infiltration in critical areas of construction. This advanced polyurethane-based solution is ideal for roof waterproofing, basements, water tanks, bathrooms, balconies, terraces, and foundation walls, where a seamless, durable, and elastic waterproof layer is required. Unlike traditional bitumen-based waterproofing, Merit Seal forms a monolithic coating that adapts to structural movement, thermal expansion, and surface cracks, ensuring uninterrupted waterproofing even in harsh weather conditions.
Bitumen Emulsion
Bitumen emulsion is a liquefied type of bitumen with a low viscosity. By dispersing bitumen in water and adding an emulsifier, ordinary bitumen turns into a low viscosity liquid that can easily be used in a variety of applications, including repairing and maintaining roads, waterproofing, spraying, etc.
Ultra Corr Bond | Waterproofing | Joint Sealants | Adhesive
Ultra Construction corr Bond is used as an epoxy bonding agent which is used for new to old concrete. Like I said before, this polymer bonding agent can be used within 20 days. If our joint is 28 days old then we use polymer bonding agent SBR but if the joint is older than 28 days then for old to new concrete whether it is 10 years old or 20 years old, we recommend ultra corr Bond. Ultra corr bond is an epoxy based product and it is composed of two components. After cleaning the surface carefully, mix part A in part B and apply with the help of brush on the specific area. After applying on the joints if there is winter season then let it be in the take free position for 1 hour and then add concrete on it and if it's summer then give it 15 to 20 minutes until it maintains that free position.
If it's the summer season then you can add concrete after applying corr bond for 15 to 20 minutes. Ultra corr bond eliminates concrete joints completely and it's one of our best products.
Sika TopSeal 107 waterproofing
SikaTop® Seal-107 is a two-component, polymer-modified cementitious waterproofing slurry used for protecting concrete and masonry surfaces. It provides excellent adhesion, is slightly flexible, and is ideal for basements, water tanks, roofs, and bathrooms. Safe for use with drinking water, it’s easy to apply with a brush or trowel.
Reviews
There are no reviews yet.